Silvercrest SBL TW6 A2 Bedienungs- Und Sicherheitshinweise Seite 24

˜ Connecting via the AUX-in jack
NOTE: Music playback via the AUX-in jack 1 has a
higher priority over a Bluetooth
Once the AUX cable 13 is plugged into the AUX-in
jack 1 , the Bluetooth
disconnected. Music playback is now switched to AUX-in
only and the LED 2 lights up green.
If the product is off, press and hold the
until the signal LED 2 lights up green and a signal tone
sequence sounds.
Switch the playback device on and start playback.
Set the highest possible volume on the playback device.
Then adjust the volume with the +/- buttons
the speaker.
˜ Switching between AUX-in
and Bluetooth
To resume music playback via Bluetooth
unplug the AUX cable 13 from the AUX-in jack 1 .
connection.
®
wireless connection will be
®
connections
®
button 8
7 9
on
connection
®
GB/IE/NI 25