Werbung
Verfügbare Sprachen
Verfügbare Sprachen
8. MOUNTING AND POSITIONING
8.1. Mounting
After you've set up the camera's parameters to your personal
preferences at home, you're ready to take it outside. When
setting up the camera for scouting game or other outdoor
applications, you must be sure to mount it in place correctly
and securely.
For optimal picture quality, we recommend mounting the
camera on a sturdy tree with a diameter of approximately 6
inches (15cm). The tree should be positioned about 16-17 feet
(5m) away from the area you want to monitor. The camera
should be placed at a height of 2.5-3.5 feet (0.75-1m). It's
important to note that the best results will be obtained at night
when the subject is within the ideal flash range. To achieve
optimal results, ensure that the subject is positioned within a
range of 10-100 feet (3-30m) from the camera.
There are two ways to mount the camera: using the provided
adjustable web belt, or the tripod socket.
Using the adjustable strap: In order to use the strap on the
camera, push one end of the strap through the two brackets on
the back of the camera. Thread the end of the strap through the
buckle. Fasten the strap securely around the tree trunk by
pulling the end of the strap firmly so there is no slack left
(Figure 11).
Using the tripod socket: The camera is equipped with a socket
at the bottom end to enable mounting on a tripod or other
mounting accessories with a standard UNC 1/4-20 thread screw
(not included).
23
Werbung
