Silvercrest SAT90A2 Schnellstartanleitung Seite 29

˜ Charging the battery
B
1. Hold the housing
2. Pull the housing
3. Connect the revealed USB plug
4. When the battery is fully charged: Disconnect the USB plug
5. Connect the USB plug
NOTES:
Make sure that the contacts of the USB plug
in the USB port. If the product does not charge, turn the USB plug 180° and plug it
into the USB port again.
The product turns on automatically as soon as it is connected with the USB port.
The product cannot be operated during charging.
The charging status is shown in the display
A charging cycle with a charging current of approx. 92 mA takes approx. 1.5 hours.
6 ] [ 8 ] [
with one hand. Hold the watch strap
3 ] [
and the watch strap
3 ] [
to a free USB port.
8 ] [
to the watch strap
8 ] [
3 ] [
apart at the
6 ] [
.
6 ] [
correctly engage with the contacts
8 ] [
.
2 ] [
with the other hand.
6 ] [
mark .
4 ] [
from the USB port.
8 ] [
GB/IE 29