Do not use the cleaner to suck spilled toner (including used toner). Sucked
toner may cause firing or explosion due to electrical contact flickering inside
the cleaner. However, it is possible to use the cleaner designed for dust
explosion-proof purpose. If toner is spilled over the floor, sweep up spilled
toner slowly and clean remainder with wet cloth.
Store toner (new or used), toner containers, and components that have been in
contact with toner out of reach of children.
2
Be careful not to touch the terminals on the ID part. Doing so may cause static
electricity to occur, and damage the machine.
3
Be careful not to trap your fingers when opening or closing the inner cover.
5
The unit gets very hot.
Wait for three minutes or more to allow hot part to cool down.
7
The printer weighs approximately 32 kg (71.0 lb.).
When moving the printer, use the inset grips on both sides, and lift slowly in
pairs. The printer will break or cause injury if dropped.
12
CSJ202
DUP201
DUP507
DUP508