Cassette Player; Stopping Playback - Philips Rc369 Bedienungsanleitung

CASSETTE PLAYER
[ 7
| :
PLAYBACK
e Slide the cassette, with the open side to the
right into the cassette opening. The radio
mutes and cassette playback starts. The
direction of playback is shown by indicator
<or>.
STOPPING PLAYBACK (4)
-~ To stop playback, press the 4 button fully
home.
— The unit will switch over to radio reception.
— The cassette is partially ejected.
REVERSE (<4 >)
e Press both < and P» buttons atthe same time
halfway in.
At the end of the tape, playback automatically
continues in the reverse direction.
FAST WINDING (<< and >>)
The direction of fast winding depends on the
direction of play indicated on the display.
Display during Action Key to press
playback
> Fast forward >>
> Fast rewind <
< Fast forward <<
< Fast rewind bP
During fast forward or rewind, you hear the
radio. lf you continue fast winding until the end
of the tape, playback restarts automatically.
TO STOP FAST WINDING
¢ To stop fast winding before the end of the
tape, briefly press the key which is not
pressed (<€<4orP>).
e Playback is then resumed.
* only for certain versions
10
MAINTENANCE
After extended use of the cassette player, dust,
contamination or grime can accumulate on the
playback head.
This results in diminishing high-note
reproduction. This can be remedied using a
cleaning cassette (once or twice a month) and
playing it through like an ordinary cassette.
CARE OF CASSETTES
~ Only use good quality cassettes (not longer
than C-90).
- To avoid possible tape damage always take
out the cassette after use. Put them back in
their boxes immediately after use.
— Never expose cassettes to heat or direct
sunlight.
CD CHANGER*
A Philips CD changer (D?B type) with 6 or 10 discs
can be connected to this car radio.
EES 7
;
> =—
Nace a
MANUAL
i eee co
Gsounce | i__|_sano_) C= jas J)
CD PLAYBACK
e Briefly press the SOURCE key to select
CHANGER as the source.
¢ Select the desired disc with DISC or DISCY.
The display shows the track number, elapsed
playing time and current disc number during
playback.
At the end of the disc, playback automatically
continues with the next disc. Any missing disc
is automatically skip.
PREVIOUS/NEXT TRACK
e Briefly press the < or P buttons to select
the desired track.
Playback resumes starting from the chosen
track. The display shows the selected track
number and elapsed playing time.
FAST BACKWARD/FORWARD
e Press and hold < or » buttons to move
quickly to another part of the disc during
playback. Playback resumes when 4 or P is
released.
TRACK SCAN
e Press SCAN key during playback to hear
the first 10 seconds of each track.
e Press the SCAN key again to resume normal
playback.