Structure And Function; Technical Data - Mhz R 03 Betriebsanleitung

ROLLER BLIND R_03 R_04 R_05 with electric motor
Operation Manual
2.4 Intended use
DE
2.4.1 Scope of application
The products are installed for decorative, screening or light management purposes.
The product is installed inside on and around windows.
The products are available with different operating versions.
2.4.2 Improper use
Improper uses are not foreseeable.
2.4.3 Operation conditions
As per the technical data. The products must be used only in dry surroundings that can be heated,
and not in any explosive atmospheres.
Furthermore, the products may only be installed at a distance from heat sources. For distances,
refer to the documents of the heat source.
2.5 Improper use
Improper uses are e.g.:
• Use of low-quality spare parts.
• Objects and obstructions in the products' path of travel.
FR
• Operation in an unsuitable environment.
The operator bears sole responsibility for any damage or losses resulting from this and the
manufacturer/vendor shall not be liable in any way.
2.6 Modifications
In the event of any unauthorised conversions or alterations of the products, any manufacturer
liability or warranty shall lapse.
No additional loads may be placed on the product!
2.7 Residual risks / hazards and protective measures
Risks or hazards, that cannot be controlled through design or safety measures must be clearly
marked through signs and/or instructions.
Risks and hazards listed below can be minimised by the personnel's knowledge and awareness.
Terminal box and any other electrical modules to be opened only by an electrician and after
EN
To avoid any breakages with hazardous consequences all load-bearing and mechanical moving
components must be routinely checked for the appearance of wear and tear or signs of damage.
Damaged / worn out components must be replaced immediately!
Fabrics and plastic parts can burn when exposed to strong heat.
For fl ame-retardant fabrics, see roller blind fabric collection data sheet.

3. Technical data

3.1 General
Dimensions W x H in [mm]:
Weight [kg]:
Drive type:
Temperature for storage and operation [°C]:
Relative humidity [%]
3.2 Electric/electromechanical specifications
Performance data, protection type and protection class as per type plate / delivery documents
3.3 Emissions (electrically powered versions only)
EMC: within permissible limits pursuant to Directive 2014/30/EU
Continuous sound pressure level [dB(A)]:
* The value can vary depending on the installation
3.4 Safety signs/labels
In accordance with Directive 2006/42/EC, Appendix 1, 1.7.1
The following pictograms and warning texts have been put on the roller blind (varies by version).
Any signs/labels that are damaged or have been removed must be replaced!
Pictogram Explanatory text
Caution!
Dangerous electrical voltage!
The drive unit does not contain
any repairable parts and may
not be opened!
20
Hazard through electric power by touching live parts
(versions with mains connection only)!
switching off the mains power.
Hazard resulting from wear and tear breakage!
Danger from heat sources
as per delivery documents
±0 to +40
50 to 80 (not condensing)
< 70*
Size [mm]
Near the connecting
20
(versions with mains
connection only)
In the separable joints
20

4. Structure and Function

4.1 Graphic Depiction
5
1 Basic bracket
3 Tube with fabric
Mounting
terminals
1 Basic bracket
3 Tube with fabric
area
Rollo R_03
2 Clamp
4 Weighted rod, inlying
5 Cable
Rollo R_04
2
2 Cable
4 Weighted rod, inlying
Edition 06.2024
Subject to technical changes I