Silvercrest RHYTHM GO Bedienungs- Und Sicherheitshinweise Seite 31

The product identification on the playback device will be
"RHYTHM GO". On the playback device "ACCEPT" the
connection. Please note the requirements of the software on
the playback device.
Once the connection is made, the LED 6 flashes white
once every 5 seconds.
The maximum range of the connection is approx. 10 m,
but this may be reduced due to the geometry of the space
(obstructing furniture, walls, etc.).
The playback device must support Bluetooth
otherwise you may not be able to use all the functions.
˜ Functions of the buttons
Start a playlist on your playback device.
The product has 6 buttons and these control the following
functions:
Button
32 GB/IE
Function
‒ Press to switch the product ON or OFF.
‒ Press briefly during playback to pause or
continue playback.
‒ In paired mode, press and hold for approx. 2
seconds to change to pairing mode to allow
another communication device to connect.
TWS mode:
‒ Press briefly to pair two speakers (same
model) before they connect to an external
Bluetooth playback device. A signal tone
will be heard if pairing has been carried out
successfully. The two speakers now work as
stereo speakers.
‒ Press briefly again to break the current TWS
connection, a signal tone will be heard.
standard 5.3
®