Silvercrest RHYTHM GO Bedienungs- Und Sicherheitshinweise Seite 29

˜ Before use
Before use, verify the package contents are complete and
undamaged!
Place the product on a level, even surface for operation.
˜ Charging
The integrated rechargable battery must be charged prior
to first use.
NOTE: This product may not be charged via the USB port
of notebooks etc. Only a suitable USB power supply unit may be
used for charging the battery.
When the integrated rechargeable battery is drained, there
will be a notification sound signal 30 min before the speaker
switches off automatically and the LED 2 flashes red.
Charge the rechargeable battery to avoid damage to the
rechargeable battery.
If the integrated battery is exhausted, you will be informed
by a signal tone and the LED flashes red approx. 30 minutes
before the speaker switches off automatically. You should
then recharge the battery as soon as possible.
Depending on the volume and the age of the battery, the
operating time of the product is approx. 12 hours of music
playback when fully charged.
Insert the USB-C plug of the charging cable 13 into the
USB-C charging socket 3 of the product. Insert the USB
plug of the charging cable 13 into the USB port on a USB
adapter (not included in scope of delivery).
NOTE: The LED 2 will light up red whilst charging and
then turn off once charging is complete. The charging time for a
drained battery is approx. 4 hours.
NOTE: The product may be used whilst charging. However,
doing so will at a minimum double the charging time.
Once charging is complete, remove the USB-C plug of the
charging cable 13 from the product.
˜ Using the product
Press the
signal tone sequence sounds. The product will now attempt
to connect to the playback device (e.g. smartphone or
computer).
30 GB/IE
button 7 until the LED 6 flashes white and a