Troubleshooting; Technical Specifications - Hendi 2000 Gebrauchsanweisung

§ Switch OFF the appliance: Once you have reached the required result, you can switch
off the appliance by pressing the "ON/OFF key"
will go off and the lighting of the control keys will go off.
§ If you do not use the appliance for an extended period, remove the plug from the wall-
mounted electrical socket and remove the pans from the appliance
NOTE! Allow the appliance to cool off before you touch it. The glass plate is very hot
after use.
Cleaning and maintenance
Always remove the plug from the socket before cleaning the appliance.
§
Beware: Never immerse the appliance in water or any other liquid!
§
Clean the outside of the appliance with a damp cloth (water with mild detergent).
§
Never use aggressive cleaning agents or abrasives. Do not use any sharp or pointed
§
objects. Do not use petrol or solvents! Clean with a damp cloth and detergent if
necessary. Do not use abrasive materials.
Clean the fan openings with the vacuum cleaner.
§
Clean the glass plate each time after use. This is to prevent any residues from burning
§
onto the glass plate.
For daily cleaning of the glass, special detergent should be used
§
Trouble shooting
Error message
E01
E02
E03

Technical specifications

Item No.
Input power
Power
Dimension
Net weight
Cause
Internal temperature of the
appliance is too high or the fan inside
is not working
The temperature of the pan is too
high. If the pan is dry or empty it can
reach a very high temperature. The
appliance will shut down to protect
the internal parts
Input voltage is too high or too low
239230
230-240 VAC ~ 50 Hz
2000W
370 x 295 x H. 45mm
2.85 kgs
. The "Digital display"
Solution
Make sure there is a minimum distance of
10cm between the ventilation slot and any
obstruction such as a wall or other
appliances. Unplug, let the appliance cool
down, plug back in and switch ON the
appliance
Check and clean the air inlet and outlet if
they are blocked
Remove the cookware from the appliance.
Let the appliance cool off
Make sure the appliance is connected to
the correct input voltage
EN
9