Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Sheepskin car seat cover
Introduction
We congratulate you on your purchase. You have selected a high
quality product. The instructions for use are to be considered as
part of this product. Before using the product, please familiarise
yourself with all the safety information and instructions for use. Only use the
product as described and for the indicated purpose. If you pass the product
on to anyone else, please ensure that you also pass on all the documentation
with it.
Intended use
Car seat cover for driver and passenger seat (per included model list,
date 2015).
Scope of delivery
1 Sheepskin car seat cover
2 Headrest rings
2 Plastic rings
1 Model list and list of types, date 2015
1 Installation instructions
Safety instructions
Correct installation res. fastening of the seat covers to the vehicle is essential
to guarantee the safety of the user. Please pay attention to the following in-
formation when installing the seat covers:
the packaging out of reach of small children.
Flame resistant per 95 / 28 / EC.
Universal size for vehicles with and without side airbag (per
model list).
Installation is permissible only in cars indicated in the model list on the
packaging or in the enclosed, detailed model list.
Please ensure correct assignment during installation. The covers are assigned
by the marking "airbag" attached to the seat cover.
Be sure the seat cover is fitted correctly. The special seam must match the
seam from the original seat cover. A seat cover shifting from use must be
properly aligned.
This seat cover must be returned to the manufacturer if damaged, independ-
ent repairs or modifications of the seat cover prohibited.
The seat cover must not cover headrest inserts, seat adjustment levers /
wheels for releasing the backrest or armrests. Allowances must be made
for appropriate inserts.
The cover must be installed so the tear seam on the seat cover matches
up with the airbag opening. The fastening straps must be secured so as
not to impair seat adjustments. Never attach the straps to cables or actu-
ators. Please refer to the vehicle owner's guide or a specialist workshop
for headrest removal / installation. Respective cut-outs must be made for
the headrest support poles.
Openings for the backrest releases must be made for 2 or 3 door vehicles.
The release levers may need to be uninstalled before installing the seat
cover and properly reinstalled afterwards.
This seat cover was tested by Dekra Klettwitz - Certificate no. 201434160.
DANGER OF SUFFOCATION! Keep
CAUTION! If the seat covers are installed incorrectly, the proper extension
and inflation of the seat air bag cannot be guaranteed in the case of a
collision.
Installing the seat cover
You will need a pair of pointed scissors.
Important: Please read the information below before installing the seat
covers!
Image 1:
Remove the headrest from the seat as specified in the vehicle
owner's guide.
Image 2:
Cover the backrest of the seat with the lambskin seat cover to
fit correctly.
Image 3:
Mark the areas where openings for the headrest guides must
be made. Please also check if openings are required for release
levers in 2 or 3 door vehicles and also mark these.
Image 4:
Remove the lambskin seat cover from the car seat.
Image 5:
Cut the markings with a pointy object (e.g. scissors). Please
also install the included plastic rings for the headrest ring open-
ings - see drawing.
Image 6:
Cover the backrest of the car seat with the lambskin seat cover
as shown in image 2. Install the headrest through the headrest
rings per the vehicle owner's guide.
Image 7:
Feed the textile tab to the back between the backrest and seat.
Remove the black securing strap from the surface of the hook-
and-loop fastener on the reverse. Secure the textile tab to the
hook-and-loop fastener.
Image 8:
Continue pulling the lambskin seat cover over the seat of your
car seat. Secure the lambskin seat cover to the underside of the
car seat using the elastic hook straps.
Instructions for care and disposal
Wash the covers by hand
Do not use bleach
Do not dry in a tumbler
Do not iron
Do not dry clean
The seat covers can be disposed of in the household waste.
Please dispose of the packaging in accordance with the local regulations.
Service
Please contact the service address set up for you.
Service address:
Julius Hüpeden GmbH
Ausschläger Weg 41
20537 Hamburg
Germany
GB/IE
5
Werbung
