Declaration Of Conformity - Mantis Deluxe XP 7567 Bedienungsanleitung

The Undersigned Manufacturer:
Schiller Grounds Care, Inc.
The Undersigned Manufacturer:
1028 Street Road
Schiller Grounds Care, Inc.
Southampton, PA 18966, USA
1028 Street Road
Southampton, PA 18966, USA
EU Authorised Representative:
Earlsmere Limited
EU Authorized Representative:
Unit 18 Valley Road Earlsmere Limited
Unit 18 Valley Road
Station Road Industrial Estate
Station Road Industrial Estate
Wombwell, barnsley, South Yorkshire, S73 ObS UK
South Yorkshire, S73 OBS UK Wombwell, Barnsley,
Notified Body:
AV Technology Ltd.
Notified Body:
AVTECH House
AV Technology Ltd
Arkle Avenue
AVTECH House
Stanley Green Trading Estate
Arkle Avenue
Handforth, Cheshire
Stanley Green Trading Estate
SK9 3RW
Handforth, Cheshire
SK9 3RW
Declare that the machine described below:
Declare that the machine described below:
Make & Type: ................................................ Mantis Motor Hoe (Tiller)
Make & Type: .............................................Mantis Motor Hoe (Tiller)
Category: ...................................................... Motor Hoe, Hand Held, Pedestrian controlled, Petrol Powered
Category:....................................................Motor Hoe, Hand Held, Pedestrian controlled, Petrol Powered
Series (model): .............................................. 7567
Series (model): ...........................................7567
Engine: .......................................................... Subaru EHO35
Engine: .......................................................Subaru EHO35
Speed: ........................................................... 6000 R.P.M
Speed: ........................................................6000 R.P.M
Net Installed Power ....................................1.03 Kw
Net Installed Power: ...................................... 1.03 Kw
Operation Width:.........................................406 mm (16")
Operation Width: ........................................... 406mm (16")
Complies with the provisions of the following European Directives and Amendments and the Regulations transposing it into national
Complies with the provisions of the following European Directives and Amendments and the Regulations transposing it into
law:
national law:
Machinery Directive ........................................2006/42/Ec
Machinery Directive ..................................... 2006/42/Ec
EMC Directive................................................ 2004/108/Ec
EMC Directive ............................................... 2004/108/Ec
Noise in the Environment Directive.................2000/14/Ec - Annex VI Procedure 2
Vibration Directive ..........................................2002/44Ec
Noise in the Environment Directive ............... 2000/14/Ec - Annex VI Procedure 2
Non Road Emissions ......................................2002/88/Ec
Vibration Directive ......................................... 2002/44Ec
Pedestrian Controlled Motor Hoe ..................EN 709
Non Road Emissions ................................... 2002/88/Ec
Pedestrian Controlled Motor Hoe .................. EN 709
Sound: Sound levels were determined in accordance with Directive 2000/14/EC amended by 2005/88/EC, Annex VI Procedure 2.
Measured Sound power level: ...................92 dB (A)
Sound: Sound levels were determined in accordance with Directive 2000/14/EC amended by 2005/88/EC, Annex VI Procedure 2.
Guaranteed Sound power level:..............93 dB (A)
Measured Sound power level: ...................... 92 dB (A)
Guaranteed Sound power level: ................... 93 dB (A)
Sound Pressure: ........................................... 93 dB (A)
Vibration:
Hand/arm vibration was measured at the right and left operator handles. Vibration is given as the vector sum of acceleration
Vibration:
in the x, y and z axes. Only the highest of the left and right readings is given.
Vibration measurements ........................4.4 m/s²
Hand/arm vibration was measured at the right and left operator handles. Vibration is given as the vector sum of
acceleration in the x, y and z axes. Only the highest of the left and right readings is given.
Intended Use: These machines is designed for use in the garden for tilling soil up to 25cm (10") deep or gently cultivate the surface 5-
Vibration measurements ............................... 4.4 m/s²
7.8cm (2"-3"deep)
Intended Use: These machines are designed for use in the garden for tilling soil up to 25cm (10") deep or gently cultivate the
surface 5- 7.8cm (2"-3"deep)

dEcLARATION OF cONFORMITy

dEcLARATION OF cONFORMITy
Sound Pressure: ................93 dB (A)
Pat Cappucci
President
th
Date: 25 June 2012
Jim White
Managing Director
th
Date: 25 June 2012