Toro 51612 Bedienungsanleitung

Leaf Cart
Model No. 51612—Serial No. 240000001 and Up
Setup
Loose Parts
Part
Push nut
Push nut tool
Wheel
Axle assembly
Carriage bolt
Locknut
Front bag frame
Rear bag frame
Bag
Vacuum hose
Adapter
Note: You will need a hammer and a 7/16 inch socket
or wrench to perform this procedure.
Assembling the Leaf Cart
1. Place a wheel over
the end of the axle and,
using a hammer and the
supplied push nut
tool (A), tap a push nut
onto the end of the axle.
2. Turn the axle over
and repeat step 1 for the
other wheel.
E 2004—The Toro Company
8111 Lyndale Ave., Bloomington, MN 55420, USA
Qty.
2
1
2
1
8
8
1
1
1
1
1
A
m-6928
Printed in China
All Rights Reserved
3. Slide the front bag frame into the axle assembly
and secure it using 4 carriage bolts and locknuts.
4. Install the rear bag frame onto the front frame
using 4 carriage bolts and locknuts.
5. Press the end of the
vacuum hose into the
opening in the bag.
Register your product at www.Toro.com
Form No. 3352-188
Operator's Manual
m-6929
m-6930
m-6931
Original Instructions (EN)