Cleaning And Maintenance - EuroLite LED Flash Flower Bedienungsanleitung

210
220
230
240
250
9 13 21
0
0
46
66
86
14 22
106
126
146
166
186
206
0
10 15 23
150
200

CLEANING AND MAINTENANCE

The operator has to make sure that safety-relating and machine-technical installations are inspected by an
expert after every four years in the course of an acceptance test.
The operator has to make sure that safety-relating and machine-technical installations are inspected by a
skilled person once a year.
The following points have to be considered during the inspection:
1) All screws used for installing the devices or parts of the device have to be tightly connected and must not
be corroded.
2) There must not be any deformations on housings, fixations and installation spots (ceiling, suspension,
trussing).
3) Mechanically moved parts like axles, eyes and others must not show any traces of wearing (e.g. material
abrading or damages) and must not rotate with unbalances.
4) The electric power supply cables must not show any damages, material fatigue (e.g. porous cables) or
sediments. Further instructions depending on the installation spot and usage have to be adhered by a
skilled installer and any safety problems have to be removed.
We recommend a frequent cleaning of the device. Please use a moist, lint-free cloth. Never use alcohol or
solvents!
The lens has to be replaced when it is obviously damaged,
so that its function is impaired, e. g. due to cracks or deep scratches!
The objective lenses will require weekly cleaning as smoke-fluid tends to building up residues, reducing the
light-output very quickly.
219 D2 DB 82% 86%
229 DC E5 86% 90%
239 E6 EF 90% 94%
249 F0 F9 94% 98%
255 FA FF 98% 100%
255 00 FF 0% 100%
45 00 2D 0% 18%
65 2E 41 18% 25%
85 42 55 26% 33%
105 56 69 34% 41%
125 6A 7D 42% 49%
145 7E 91 49% 57%
165 92 A5 57% 65%
185 A6 B9 65% 73%
205 BA CD 73% 80%
255 CE FF 81% 100%
149 00 95 0% 58%
199 96 C7 59% 78%
255 C8 FF 78% 100%
DANGER TO LIFE!
Disconnect from mains before starting maintenance operation!
S
Color chase 5
S
Color chase 6
S
Color chase 7
S
Color chase 8
S
Color chase 9
SMD trapeziums - speed
F
Increasing speed
COB LEDs - color presets and color change
S
No function
S
Red
S
Green
S
Blue
S
White
S
Red + green
S
Red + blue
S
Green + blue
S
Red + green + blue + white
F
RGB color change with decreasing speed
Internal program (auto mode), sound control
S No function
S Internal program (auto mode)
S Sound control
CAUTION!
30/32 00106887, Version 1.0