Replacing The Fuse; Technical Specifications - EuroLite LED Flash Flower Bedienungsanleitung

There are no serviceable parts inside the device except for the fuse. Maintenance and service operations are
only to be carried out by authorized dealers.

Replacing the fuse

If the fine-wire fuse of the device fuses, only replace the fuse by a fuse of same type and rating.
Before replacing the fuse, unplug mains lead.
Step 1: Unscrew the fuseholder on the rearpanel with a fitting screwdriver from the housing (anti-
clockwise).
Step 2: Remove the old fuse from the fuseholder.
Step 3: Install the new fuse in the fuseholder.
Step 4: Replace the fuseholder in the housing and fix it.
Should you need any spare parts, please use genuine parts.
If the power supply cable of this device becomes damaged, it has to be replaced by a special power supply
cable available at your dealer.
Should you have further questions, please contact your dealer.

TECHNICAL SPECIFICATIONS

Power supply:
Power consumption:
DMX channels:
DMX512 connection:
Sound control:
Flash-rate:
COB LEDs:
SMD LEDs:
Dimensions (LxWxH):
Weight:
Maximum ambient temperature T
Maximum housing temperature T
Min.distance from flammable surfaces:
Min.distance to lighted object:
Fuse:
Accessory:
EUROLITE TPC-10 Coupler, silver
EUROLITE TPC-10 Coupler, black
EUROLITE Safety bond A 3x600mm up to 5kg, silver
EUROLITE Safety bond A 3x600mm up to 5kg, black
EUROLITE DMX cable XLR 3pin 3m bk
PSSO DMX cable XLR 3pin 3m bk Neutrik
SOMMER CABLE DMX cable XLR 3pin 3m bk Hicon
SOMMER CABLE DMX cable XLR 3pin 3m bk Neutrik
OMNITRONIC IEC extension 3x1.0 3m bk
Please note: All information is subject to change without prior notice. 03.03.2017 ©
:
a
(steady state):
C
31/32
100-240 V AC, 50/60 Hz
170 W
10/15/23
3-pin XLR
via built-in microphone
23 Hz
3 x RGBW, 30 W each
132 x RGB
170 x 305 x 290 mm
4 kg
45° C
55° C
0.5 m
0.1 m
T 2 A, 250 V
No. 59006856
No. 59006858
No. 58010310
No. 58010342
No. 3022785H
No. 30227810
No. 30307457
No. 3030746Z
No. 30235201
00106887, Version 1.0