Wolkenstein W I4-90 A++ IXTZ Bedienungsanleitung Seite 38

9. Fix the chimney with 4 screws type ST4*8.
10. You need at least two persons to lift the hood. Fix the hood with 16 screws type
M4*10 on the angle irons.
11. Now pull the extension tube and fix it. Ensure that there are not any gaps.
Remove the S-hook and pull the outside chimney to its proper position.
12. Insert the grease filters and connect the appliance to the mains
If the socket is covered by the chimney, you must plug in the appliance at an earlier
10
point in
time.
10 .
38