In case a malfunctioning or irregularity should be found during these checks, do not use the
appliance and contact your dealer or a qualified technician.
WARNING!
Servicing and repair activities must only be carried out by qualified personnel, using genuine
accessories and spare parts. TRYING TO REPAIR THE APPLIANCE BY YOURSELF IS STRICTLY
FORBIDDEN and would result in the immediate cancellation of the warranty while it could also lead
to the risk of injuries.
6.4 If the appliance is not used for a long period of time:
Disconnect the plug from the electric socket or disconnect the appliance from the mains power
supply.
Carefully clean appliance and dry it;
Cover the appliance with a fabric sheet that allows air to circulate but at the same time protects
it from dust and dirt.
7. Troubleshooting
PROBLEM
The appliance does
not start
The cooling fans
doesn't start when
the "ON/OFF" key is
pressed.
- 32 -
POSSIBLE CAUSES
The electric plug is not inserted
in the socket.
The pan/wok/cookware has not
been positioned on the cooking
surface or it is not made of a
ferromagnetic material.
The "ON/OFF" key has not been
pressed.
The thermal protection has
stopped the appliance following
overheating.
The protection fuse has blown.
The air vents below the
appliance are obstructed by dust
or other residued that reached
the fans and blocked them.
SOLUTIONS
Insert the plug in the electric socket.
Correctly position the
pan/wok/cookware on the cooking
surface and make sure it is suited
for the use with induction cooking
hobs/woks.
Press the "ON/OFF" button and
adjust the power or the
temperature as desired.
Wait 15-20 minutes for the
appliance to cool before trying
again to start it.
Contact the dealer to request
technical support.
Contact the dealer to request
technical support.