Storage; Disposal; Installation And Operation Of Appliance; Electrical Connection (Plug-Socket) - Cookmax Rt350Pro Handbuch Zur Installation, Bedienung Und Wartung

4.3 Storage

The packaging must be kept closed until the moment the appliance is installed, and during storage
it is necessary to comply with the markings regarding the positioning and storage of the packaging.
The packaged appliance must always be stored in the following conditions:

do not store outdoors;

store in a dry place, protecting it from dust and at a temperature of between +0°C and +50°C
and a relative humidity of between 30% and 80%;

do not expose to the action of aggressive agents;

protect from the action of the sun's rays;

avoid impacts;

if stored for a prolonged period of time (more than three months), regularly check the
condition of all the packaging.

4.4 Disposal

At the end of the appliance's working life it must be disposed of in accordance with the current local
and national regulations.
The appliance contains electrical and electronic components, referred to as "Waste of electrical and
electronic equipment" (WEEE).
In accordance with Italian Legislative Decree 49/2014, which implements Directive 2012/19/EU, the
Manufacturer requires that the appliance be disposed of at authorised collection centres, to avoid
potential affects on the environment and to protect human health.
The symbol shown alongside indicates the need to dispose of the appliance according to
the WEEE requirements when it is scrapped.
WARNING!
To avoid any unauthorised use and the related risks, ensure that the appliance cannot be
reactivated before disposing of it. To do this, the appliance must be disconnected from the power
supply and the power supply cable must be cut.

5. Installation and operation of appliance

5.1 Electrical connection (plug-socket)

HAZARD RISK! Live components!
The models RT350Pro – TT350 and TT350W are equipped with a single-phase cable and a Shuko
plug. The models TT500 and TT500W are equipped with a single-phase cable without plug: the
connection to the power line must be made by interposing a disconnection device with a min.
contact distance of at least 3mm and of a capacity adequate to the appliance's max absorbed power.
27
TRANSLATION OF THE ORIGINAL INSTRUCTIONS
- 27 -