Parts Of The Appliance; Included Tools And Accessories; Protection Devices Present On The Appliance; Safety Instructions - Cookmax Rt350Pro Handbuch Zur Installation, Bedienung Und Wartung

N.B. The manufacturer reserves the right to introduce improvements, technical modifications and
changes to the appearance of the appliance at any time without prior notice.

2.4 Parts of the appliance

Control panel (Fig. 1 and Fig. 3 – Para. 8)
The control panel consists of "touch screen" ceramic glass panel.
Reference should be made to Section 5 (Installation and operation of appliance) for information
regarding the use of the appliance.

2.5 Included tools and accessories

The appliance is supplied with the following tools and accessories:
1- Induction Hob/Wok;
1- User's manual (Installation, operating and service instructions);

2.6 Protection devices present on the appliance

The appliance is equipped with the following safety protection devices:
- Magnetic sensor that prevents the induction to be turned on if no pan or a pan of not suitable
material is in contact with the ceramic glass cooking surface.
- Thermal protection against the appliance's overheating (in case of overheating stop, please
wait at least 15 minutes before trying to turn on the appliance again).
- Fuse for protection against malfunction induced short-circuits.
It is strictly forbidden to remove, modify or deactivate any protection/safety
device of the appliance.

3. Safety instructions

This section summarises the information concerning all the essential safety-related aspects. The
individual sections also contain important information (with relative symbols) concerning safety, in
order to prevent the occurrence of hazards. It is also necessary to comply with the information given
on the pictograms, nameplates and wording on the appliance, taking care to ensure they are legible.
Compliance with all the instructions concerning safety guarantees optimum protection and
operation of the appliance in complete safety and without problems.
The instructions concerning safety at the workplace refer to the EU Directives in force at the time
of manufacture of the appliance. If the appliance is used in industrial conditions, during the entire
period of use, the user must check compliance of the specified safety devices with the current
regulations in this sector, and comply with the new regulations. If the appliance is used outside
the European Union it is necessary to comply with the local regulations on health and safety at the
workplace in force at the place of use of the appliance.
In addition to the requirements for health and safety at the workplace contained in this handbook
23
TRANSLATION OF THE ORIGINAL INSTRUCTIONS
- 23 -