Connect Data Storage (Optional); Insert Batteries Of Remote Control; Basic Operation; Switch On Receiver - Avanit SXHD Bedienungsanleitung

 If your home cinema system (hi-fi system) supports HDMI


4.5 Connect Data Storage (Optional)

Connect a data storage (USB stick or hard drive with USB connection) at the
USB connector to be able to access MPEG, MP3, JPG or other media data files.

4.6 Insert Batteries of Remote Control

This describes the steps for inserting new batteries of the remote control or
for replacing empty batteries:
1. Open the battery compartment on the bottom side of the remote control.
Remove the cover of the battery compartment.
2. Place the two batteries 1.5 V (type: AAA).
Ensure correct polarity!
3. Close the battery compartment
 Replace the batteries if certain remote control functions

 When replacing batteries, always ensure that all batteries

5 Basic Operation

This chapter describes the required steps to be able to use the offer of radio and
TV channels provided via satellite.

5.1 Switch on Receiver

1. Switch on all connected devices.
2. Ensure that the correct AV input is selected at the TV set (i.e. that the signals
from the receiver are displayed).
AVANIT SXHD
connection, then use such connection.
This ensures best possible audio and video quality with
digital signals.
are not performed any more or are performed incorrect-
ly.
are replaced.
Basic Operation
91