Raps System; Menu Tools; Software Version; Factory Settings - Avanit SXHD Bedienungsanleitung

Extended Settings and Functions
6.3.4

RAPS System

The window RAPS System displays
at Last changes from the date of
the RAPS file on the receiver.
 Select RAPS Mode to determine if the channel list should be completely
recreated or only be updated after resetting to factory settings.
 Select Auto RAPS Scan to determine if the automatic update function
should be activated.
 Select Start to manually start new configuration or updating.

6.4 Menu Tools

6.4.1

Software Version

The sub-menu Information displays the current version number of the AVANIT
SXHD software.
6.4.2

Factory Settings

If you erroneously saved wrong settings or if you want to pass on the receiver
without your settings, then you can reset the receiver to the factory settings
(reset):
To reset the receiver:
1. In the menu Tools, select the sub-menu Factory Settings.
2. Press the OK key.
You will be asked if you want to reset the receiver and delete individual set-
tings.
3. Select Yes or No by using the keys /
OK.
After resetting your receiver, the language selection menu will be displayed.
6.4.3

Display Setting

This sub-menu can be used to edit various display settings:
 Select Brightness to change the brightness value from 0 to 100 (default
value is 50) by using the keys
124
und /
/ and /
, and then press
.
AVANIT SXHD