Multi Satellite; Menu System Setup; Tv System - Avanit SXHD Bedienungsanleitung

 At Tuner, select the LNB to process the signals (if only one LNB is present,
then this item will not be active).
 Start channel search by selecting Search and confirm by pressing OK.
6.2.5

Multi Satellite

Multi Satellite differs from Single Satellite by the fact that all satellites marked
in the satellite list are scanned for receivable channels.

6.3 Menu System Setup

6.3.1

TV System

Here you can make several settings to the signal format at the audio and video
outs.
 In the menu System Setup, select the sub-menu TV System and confirm by
pressing OK.
1. Select the Video Resolution.
2. Press OK to display a list with the selectable values.
3. Select the value appropriate to your TV set by using the keys
/ PR-.
and
Example: If your TV set is capable of displaying a resolution of 720p
you should also set 720p at the receiver (720p is the factory setting).

In addition to the setting menu, the video resolution can be
changed directly via the remote control:

 Press (several times, if necessary) the green function key to
switch the resolution of the video signal at the HDMI output.
The set value is shown in the display.
31 p = progressive scan: progressive scan images are transmitted, e.g. 720p means that 50 progres-
sive scan images with a resolution of 1280 pixel/line and 720 lines/image are transmitted per se-
cond.
i = interlaced video: odd and even lines are transmitted alternatingly.
AVANIT SXHD
If receiver and your TV set are connected via a SCART cable,
then max. resolution is 576i (PAL format).
Extended Settings and Functions
/ PR+
31 then
121