Extended Settings and Functions
6.2.3
Antenna Setup
The submenu Antenna Setup states several entries depending on your selec-
tion of
Fixed Antenna
at Antenna Connection.
6.2.3.1
Fixed Antenna
At Satellite, select the satellite to which the following settings should apply.
At LNB Freq, select the value corresponding to the used LNB. Alternatively,
press OK, select the corresponding value from the list, and confirm by press-
ing OK.
Possible values LNB frequency (MHz)
5150
5750
5950
9750
10000
10050
10450
A universal LNB with 9750 - 10600 MHz is the default value.
You can set signal strength and signal quality for receiving of a certain tran-
sponder:
116
or
The options are limited to such satellites that are marked in
the Satellite List as such satellites from which you want to
receive channels.
10600
10700
10750
11250
11300
5150 - 5750
5750 - 5150
Motor Antenna
Universal (9750 - 10550)
Universal (9750 - 10600)
Universal (9750 - 10700)
Universal (9750 - 10750)
Universal (9750 - 10600)
Unicable (9750 - 10600)
Unicable (10200)
AVANIT SXHD