Equipment And Accessories; Vacuum Cleaner Preparation - Eta Roxy Bedienungsanleitung

II. EQUIPMENT AND ACCESSORIES
A – vacuum cleaner
A1 – ON/OFF button
A2 - mode setting button
A3 - light indication for operation and
set mode
A4 - rotary brush cover
A5 - removable rotary brush
A6 - UV disinfection light
A7 – handle
A8 – power cord
III. VACUUM CLEANER PREPARATION
Remove all packing material, take out the vacuum cleaner and the accessories.
Remove all possible adhesion foils, stick-on labels or paper from the appliance.
VACUUM CLEANER ASSEMBLY
When assembling the vacuum cleaner, follow the procedure indicated in Fig. 1.
IV. USE OF VACUUM CLEANER
The vacuum cleaner is specially designed for vacuuming mattresses, beds, sofas, upholstered
furniture, etc. If you will be vacuuming soft, creased, pliable or more delicate surfaces (e.g. blankets,
cushions, etc.), we recommend using the rotary brush off mode (see OPERATION section).
Before use, first connect the vacuum cleaner to the electricity supply.
CONTROL
A1 button
A2 button
The vacuum cleaner is equipped with safety sensors at the bottom that automatically
switch off the UV disinfecting light in case of a broken contact with the vacuumed
V. REMOVING THE DUST CONTAINER AND FILTERS
DUST CONTAINER REMOVAL
When taking out the dust container B follow the procedure indicated in Fig. 1. Dispose of
dirt contained in the dust container with regular household waste. An emptied and cleaned
container is to be put back into the vacuum cleaner in reverse order.
B – dust container
- vacuum cleaner ON/OFF switch
- switching between modes of operation (3 modes of operation:
UV disinfection + vacuuming + rotary brush / vacuuming + rotary
brush / UV disinfection + vacuuming), the selected setting is
indicated by a light signal A3
Caution
surface.
EN - 17
B1 – container lock button
B2 – lid
B3 – textile micro-filter
B4 – separator
EN