Technical Information; Overload Protection A Built-In Overload Circuit Protects The Switched; Notes About Using This Model For The First Time; Preparations - Märklin 29074 Bedienungsanleitung

1 no. 66361 switched power pack
1 no. 60657 Mobile Station
1 Operating instructions
1 Operating instructions
1 Operating instructions Mobile Station
1 Operating instructions Mobile Station
1 Operating instructions switched power pack
1 Get on Board brochure
1 Warranty card

4. Technical Information

Switched power pack:
Voltage supply train:
Power consumption of train
H0 Gauge (1:87 scale)
4.1 Overload Protection
A built-in overload circuit protects the switched
mode power pack and the digital connector box from
damage in the event of an overload or short circuit.
The locomotives will all come to a stop.
(See Section 10)
5. Notes about Using this Model for
the First Time
• The switched power pack may not be plugged
into the wall outlet yet.
• Set up the layout as shown in Part 6.

6. Preparations

6.1 Joining Track Sections and Setting up Track
When setting up the track, please note the track
numbers and the sequence for the track sections!
The number is located on the underside of the
track.
D GB F NL
S DK
D
F
input 230 volts AC
output 18 volts DC/36 VA
max 22 volts DC
max 13 VA
Putting track together
GB
NL
Taking
track apart
Plug the digital connector box into any section of
track as shown in the diagram.
digital connector box

After the digital connector box is connected to a
section of track, the track can be put together as
shown in the following diagram.
red
brown
9