Technical Information; Notes About Using This Model For The First Time; Preparations - Märklin 29139 Bedienungsanleitung

1 IR Controller 179881
2 type AAA/LR 03 1.5 volt batteries
Operating instructions
Operating instructions
Warranty card

4. Technical Information

Switched power pack:
Voltage supply train:
power consumption of train
H0 Gauge (1:87 scale)
4.1 Overload Protection
A built-in overload protection protects the swit-
ched power pack from damage in the event of an
overload or a short circuit. All lokomotives will be
stopped. See also point 10
5. Notes about Using this Model for
the First Time
• The switched power pack may not be plugged
into the wall outlet yet.
• Set up the layout as shown in Part 6.

6. Preparations

6.1 Joining Track Sections and Setting up
Track
When setting up the track, please note the track
numbers and the sequence for the track sections.
Putting track together
10
D GB F NL
S DK
input 230 volts AC
output 18 volts DC/18 VA
max 22 volts DC
max 13 VA
Taking track apart
Layout
!
6.2 Switched Mode Power Pack •
IR Controller • Base Station
1 – Switched mode power pack
2 – Feeder wires
3 – Base station with socket
4 – Lens
Base Station

