Programming Of Switching On - GGMgastro DPZ3030E Bedienungsanleitung

OPERATION - ELECTROMECHANICAL VERSION
The display language can be chosen from a list of available options.
To set the language, enter the clock programming mode (see setting the
clock) and confirm the data until:
SELECT LANGUAGE
ENGLISH
appears on the display.
Adjust and confirm using the same procedure adopted for setting the clock.
By confirming you leave the programming mode and return to the previous
mode.

7.4.3. Programming of switching on

To access the settings for the programmed switching on, press and
immediately release the key with the oven on or off.
At first the state of the automatic switching on (active or inactive) appears
on the display (AUTOSTART : ON or OFF).
Press the keys or to activate or deactivate the programmed
switching on.
After activating with the key , press the key and the day and time
appear on the display. To select the switching on time, position the flashing
cursor under the time using the key and then press keys or to
set the value. If the oven is not required to be switched on a certain day
(e.g. closing day), select the off option between 23 and 00 while setting the
time using the keys or . Press the key again to move to minutes
and press the key once again to bring the cursor back to the day of the
week.
To move to the next or previous day press the keys or .
When the setting is complete, press the key again and wait for about
five seconds. The data is automatically memorised and the oven returns to
the previous function.
When the oven is off, the day and time of the switching on appears on the
display to indicate that this function is on. The word "off" appears instead of
the day and time if the function is not activated.
20
Synthesis 05/40V