Settings; Cooking Time Adjustment; Temperature Adjustment; Top And Bottom Power Adjustment - GGMgastro DPZ3030E Bedienungsanleitung

OPERATION - ELECTROMECHANICAL VERSION

7.3. SETTINGS

7.3.1. Cooking time adjustment

The desired cooking time is set directly by the user, relating to the relative
speed of mesh progress automatically controlled by the electronic circuit
board.
When the oven is switched on, the mesh is inactive and the cooking time
flashes on the display.
Press the mesh start/stop key to activate the mesh.
Mesh movement can be activated or deactivated at any time using the key
.
When the mesh is inactive, the cooking time flashes.
When the oven is on, the mesh can be manually adjusted to reach
maximum speed by pressing the key for 4 seconds.
Press the same key again to return to the previous setting.
See the "programming" paragraph to set the cooking time.

7.3.2. Temperature adjustment

The oven temperature can only be adjusted when the oven is on.
The oven heats up to and then remains at the set temperature until it is
switched off.
When the oven is on, the real temperature of the cooking chamber is
indicated; press the parameter value increase key to display the set
temperature.
See the "Programming" paragraph to learn how to adjust the set
temperature.

7.3.3. Top and bottom power adjustment

To heat up of the oven , modulate the ignition of the top and bottom heating
elements according to the selected power percentage, as explained
hereunder.
The modulation consists in the ignition of the heating elements for a fixed
time, on a period of 45 seconds in total.
For example if the value 20% is selected, the heating elements will be fed
cyclically for 9 seconds each 45.
17
Synthesis 05/40V