Choosing A Location - Abus Rm20 Bedienungs Und Installationsanleitung Handbuch

COMMISSIOnInG
First press the unit's activation
button (I), shown on the opposite
side in the diagram. After the button
has been pushed in, it must be flush
with the unit's housing. If the smoke
alarm has been activated successfully,
a brief test tone sounds to confirm
activation. This test tone will also
sound when you press the test and
stop button (IV) to verify that the unit
is operating correctly.
fUnCTIOn
The heat alarm function is activated
under the following conditions:
• when the temperature is over 40°C
and rises by more than 4°C in
80 seconds
• If the temperature exceeds 60°C for
more than 8 seconds
• heat alarm tone: single beep, once
a second
• Smoke alarm tone: double beep,
once a second

ChOOSInG A lOCATIOn

Bedroom
Children's
room
Living room
Kitchen
Boiler room
Workshop
room
RM
Bedroom
RM
RM
Children's
room
As a minimum requirement
smoke alarms should be installed in
all bedrooms, children's rooms and
corridors that function as escape
routes, in the middle of the ceiling.
– 15 –
RM
RM
RM
RM
RM
RM
RM
RM
Bathroom Kitchen
RM
Children's
room Living room
RM
RM
RM
RM
RM
,
RM