Genmitsu 3018-PROVer V2 Installationsanleitung Seite 7

STEP 2: Remove the Gantry
1. Remove the Y-Axis limit switch cable and Y-axis motor cable from the machine.
Tip: Please record the connection of the cable before removing it by taking pictures or other methods to
facilitate subsequent wiring work.
2. Unscrew the fixing screws on the left and right sides of the gantry, and remove the gantry.
(4) Gantry Fixing Screw
Gantry
(4) Gantry
Fixing Screw
05