LEGRAND PRO 21 7756 42 Bedienungsanleitung Seite 5

Personalise the lighting level of the + and - keys (outside learning)
The ON and OFF keys are factory set and cannot be modified.
Notes : The + and - keys can manage 2 different lighting levels :
- - key = 33%
- + key = 66% (factory set).
It is recommended to perform this operation with the rockers mounted.
On the + key :
- adjust the lighting level using the ON, OFF +, - keys by a long press
- validate by simultaneous pressing on the + and ON keys for 5 secs (after switching off, the load switches on again at the
set level), the level of the + key is then saved.
On the - key :
- adjust the lighting level using the ON, OFF +, - keys by a long press
- validate by simultaneous pressing on the - and OFF keys for 5 secs (after switching off, the load switches on again at
the set level), the level of the - key is then saved.
To save a lighting level during the learning, step 2 of Scenario learning becomes:
Press LEARN Press the ON command key
which must be associated
with the leader
5
Press the + or - command key
to set the required
lighting level