Herunterladen Inhalt Inhalt Diese Seite drucken

Setting The Clock - Sharp CP-RW5500H Bedienungsanleitung

Audio tower system
Inhaltsverzeichnis

Werbung

Verfügbare Sprachen

Verfügbare Sprachen

Setting the Clock

In this example, the clock is set for the 24-hour (0:00) display.
1
Press the ON/STAND-BY button to turn the power on.
2
Press the MENU button.
3
Turn the jog dial to select "CLOCK" and within 10 seconds, press
the ENTER button.
4
Turn the jog dial to select the 24-hour or 12-hour display and within
2 minutes, press the ENTER button.
"0:00"
The 24-hour display will appear.
(0:00 - 23:59)
"AM 12:00"
The 12-hour display will appear.
(AM 12:00 - PM 11:59)
"AM 0:00"
The 12-hour display will appear.
(AM 0:00 - PM 11:59)
Note that this can only be set when the unit is first installed or it has been reset.
[Refer to "Clearing all the memory (reset)" on page 37 for details.]
5
Turn the jog dial to adjust the hour and within 2 minutes, press the
ENTER button.
z When the 12-hour display is selected, "AM" will change automatically to "PM".
6
Turn the jog dial to adjust the minutes and within 2 minutes, press
the ENTER button.
z The hour will not advance even if minutes advance from "59" to "00".
z The clock starts from "0" second. (Seconds are not displayed.) The time display
will disappear after a few seconds.
To confirm the time display:
[When the unit is in the stand-by mode]
Press the DISPLAY button on the remote control. The
time display will appear for about 3 seconds.
[When the power is on]
Press the MENU button. The time display will appear
for about 10 seconds.
Note:
"CLOCK" will appear or time will flash at the push of the DISPLAY button when the
AC power supply is restored after a power failure or unplugging the unit. Reset the
clock as follows.
To reset the clock:
[When time is flashing]
1
Press the ON/STAND-BY button.
2
Press the MENU button.
3
Press the ENTER button.
4
Perform "Setting the Clock" from step 5.
[When "CLOCK" appears]
Perform "Setting the Clock" from the beginning.
To change the 24-hour or 12-hour display:
1
Clear all the programmed contents. [Refer to "Clearing all the memory (reset)"
on page 37 for details.]
2
Perform "Setting the Clock" from the beginning.
01/1/9
E2.fm
ENGLISH
E-13

Werbung

Inhaltsverzeichnis
loading

Diese Anleitung auch für:

Cd-ch1500h

Inhaltsverzeichnis