Sleep Operation - Sharp CP-RW5500H Bedienungsanleitung

„ Sleep operation

1
Play back the desired sound source.
2
Press the MENU button.
3
Turn the jog dial to select "SLEEP". Then press the ENTER button.
To change the sleep time:
Whilst the sleep time is displayed, turn the jog dial.
(Maximum: 2 hours - Minimum: 30 minutes)
4
Press the ENTER button.
5
Your system will enter the power stand-by mode automatically after
the preset time has elapsed.
z The volume will be turned down 1 minute before the sleep operation finishes.
Note:
Once the sleep time is set, it will remain unchanged until the setting is changed.
To cancel the sleep operation:
Press the ON/STAND-BY button whilst the sleep timer is set.
To confirm the remaining sleep time:
Perform the above steps 2 - 3.
This time you can also change the sleep time.
„ To use timer and sleep operation together
Example: To fall asleep and wake to the same radio station
You can play back the same source only (the function cannot be switched).
1
Set the desired playback or recording time (steps 1 - 8, pages 31 -
32).
2
Whilst playing the desired source, set the sleep time (see left, steps
1 - 4).
1. Timer playback (recording) setting
2. Sleep timer setting
A
Sleep operation will automatically stop.
: 30 minutes - 2 hours
: Desired time
01/1/9 E4.fm
Timer playback (recording)
start time
B
End time
ENGLISH E-33