Meteo Control BLUE'LOG XM Schnellstartanleitung Seite 8

7
CONNECTION TO VCOM – REGISTRATION
To establish a connection to VCOM, you first need to set up a system in VCOM. You can
then register in two ways:
•
Via the blue'Log web interface
•
Via VCOM
blue'Log web interface
Under PV System > VCOM, enter a plant key (e.g. WTTRY), a VCOM user name, and a
password and then click on Registration.
You can set the transmission interval to the desired frequency. The time indicates how
often the data in VCOM will be updated.
VCOM
Navigate to System configuration (Wrench icon) > System configuration > Data
logger > Register data logger. If you have not yet defined a data logger, select blue'Log
X series.
Add the blue'Log, giving the blue'Log hardware number (HW No.), the blue'Log user
name, and password.
EN