Meteo Control BLUE'LOG XM Schnellstartanleitung Seite 6

5
Display
FACTORY RESET
By pressing the ESC button for 5s you can reset the blue'Log to its factory settings. After
the 5s a security check appears in the display which must be confirmed by pressing OK.
After the reset, the blue'Log will be restarted.
BLUE'LOG CONFIGURATION – WEB INTERFACE
Browser registration
To connect to your blue'Log, enter the blue'Log IP address in the address bar of your
Internet browser.
As an alternative, you may enter the host name of the blue'Log*.
Router – network support:
•
DNS, Netbios:
•
No DNS, Netbios:
*The host name can be changed via the web interface under System > Ethernet.
Setting up user access
You need to set up user access when logging on for the first time. Please enter a user
name, password, display PIN and e-mail address.
You can change user data and set up other users via the web interface under System >
Users.
EN
http://blue-xnnnnnnnn
http://blue-xnnnnnnnn.local
n = last eight digits of the hardware number