Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
1
2
6
Fuse: F 2 A, 250 V
Power supply:
110-240 V AC, 50/60 Hz ~
Safety rope
DMX occupation:
1: Ground
2: Signal (-)
3: Signal (+)
DMX IN DMX OUT
10
INSTALLATION
Overhead rigging
Please consider the EN 60598-2-17and the respective national standards during the installation!
The installation must only be carried out by an authorized dealer!
The installation of the device has to be built and constructed in a way that it can hold 10 times the weight for
1 hour without any harming deformation.
The installation must always be secured with a secondary safety attachment, e.g. an appropriate catch net.
This secondary safety attachment must be constructed in a way that no part of the installation can fall down
if the main attachment fails.
When rigging, derigging or servicing the device staying in the area below the installation place, on bridges,
under high working places and other endangered areas is forbidden.
The operator has to make sure that safety-relating and machine-technical installations are approved by an
expert before taking into operation for the first time and after changes before taking into operation another
time.
The operator has to make sure that safety-relating and machine-technical installations are approved by an
expert after every four year in the course of an acceptance test.
The operator has to make sure that safety-relating and machine-technical installations are approved by a
skilled person once a year.
7
8
9
Power out
Manual focus
MODE
ENTER
UP
DOWN
DMX occupation:
1: Ground
2: Signal (–)
3: Signal (+)
4: NC
5: NC
DMX IN
DMX OUT
11
12
DANGER TO LIFE!
1
(6) Fuseholder
(7) Power input
(8) Zoom screw
(9) Power output
(10) Safety eyelet
(11) 3-pin DMX connections
(12) 5-pin DMX connections
(13) LCD Display with operating buttons
13
19/26
00072743.DOC, Version 1.0
Werbung
Inhaltsverzeichnis
