Hama EWS-800 Bedienungsanleitung Seite 8

Note – Summer time
The clock automatically switches to summer time.
is activated.
6.2. Basic and manual settings
• Press and hold the SET button (28) for approx. 3 seconds to make the following settings one after the other:
• Time zone (24)
• 12/24 hour format (24)
• Hours (24)
• Minutes (24)
• Year (21)
• Month (21)
• Day (21)
• Temperature unit (°C / °F) (13+17)
• Room temperature value (12)
• Room humidity value (14)
• Outdoor temperature value (18)
• Outdoor humidity value (20)
• Atmospheric pressure unit (hPa / inHg) (5+9)
• Relative atmospheric pressure reference value (5)
• Atmospheric pressure threshold value (5)
• Storm threshold value (5)
• To select the individual values, press the MIN/MAX button (30) or the + button (31) and confirm each
selection by pressing the SET button (28).
• Press the SET button (28) to adopt the set value displayed and to skip.
• If you do not make an entry for 20 seconds, you automatically exit setup mode. Alternatively, press the
SNOOZE / LIGHT button (32) to exit setup mode before selecting all the values.
Note – Time zone
• The DCF signal can be received over a wide range, but always corresponds to the applicable Central
European Time in Germany. Make sure you account for the time difference in countries with another
time zone.
• If you are in Moscow, the time is 3 hours later than in Germany. This means that you should set +3 for
the time zone. The clock then automatically sets itself 3 hours ahead after receiving the DCF signal or
according to the manually set time.
appears on the display as long as summer time
7