Unpacking - EHEIM professionel 3 Bedienungsanleitung

english
External filter 2080 for aquariums
Model:
See nameplate on top part of the filter
Subject to technical alterations.
Contents
Definition of individual parts / What delivery includes
Installing the hose
Installing the filter
Filling of filter materials
Taking into operation
Servicing and maintenance
what to do if...
General operating description
The EHEIM professionel 3 external filter cleans the aquarium water in a closed loop. The professionel
3 external filter has two suction channels for individual placement of suction areas in
the aquarium. The built-in maintenance-free pump ensures continuous circulation. Water from
the aquarium is passed through several filter layers where it is filtered mechanically, biologically
or by adsorption before flowing back into the aquarium. For the filter to function, air has first
to be removed from the system. This is easily done using the built-in priming aid.
Note:
For optimal filter performance and trouble-free operation, it is essential to use EHEIM
original filter materials (see chapter on Filling of Filter Materials).
Definition of individual parts / What delivery includes
1. 2.
Hose guard, Safety adapter with integrated shut-off valves,
5. 6.
Red safety catch,
10.
Sealing rings (prefilter),
14. 15.
Filter pad (white),
18. 19.
Filter container,
24. 25.
float, Brace, Sealing ring,
29.
clamp, Outlet bend,

Unpacking

When unpacking, check that all parts are present. Some installation accessories are packed in
the filter container.
- Tilt out all four closing clips on the filter head, push up and fold out. Remove pump head (see
Point 7). Remove prefilter, lattice screen cover and filter pad (white) from the container (see
Point 8). Pull out filter inserts by the handle (see Point 9).
Installing the hose
1
Place a strainer on each suction pipe and fit at the desired locations in the aquarium with
the help of the suction holders.
18
7.
Pump head, Priming aid,
11.
Filter pad (blue),
16.
Filter inserts, Transportation dish for prefilter,
20.
Castors, Partition,
26.
Suction pipe (2x),
30. 31.
Nozzle tube, Hoses.
3.
Shut-off lever,
8. 9.
Intake fitting,
12. 13.
Prefilter, Lattice screen cover,
21. 22.
Indicator lid, Indicator housing,
27.
Strainer (2 x),
Page
18
18-19
19
20
21
21-23
23-25
4.
Indicator,
Sealing gasket,
17.
Closing clips,
23.
Spring with
28.
Suction head with