Troubleshooting; Service; Guarantee; Error Correction - Parkside Performance PPWD 30 A1 Originalbetriebsanleitung

GB MT
friendly and resource-saving recycling is
ensured.
Depending on the implementation in na-
tional law, you may have the following op-
tions:
• Return to a shop,

Troubleshooting

The following table will assist you in fixing faults:
Problem
Device does not start
Weak or no suction power/
throughput
Dust or dirt is blown out of
the device

Service

Guarantee

Dear Customer,
This product is provided with a 5 year
guarantee from the date of purchase.
40
• Hand over to an official collection
point,
• Return to the manufacturer/distributor.
This does not affect accessories enclosed
with the old devices or tools without any
electrical components.
Possible cause
On/Off switch (3) turned off Check the position of the
No mains power supply
On/Off switch (3) is broken
Defective motor
Suction hose (7) or nozzles
blocked
Suction pipe (31) not cor-
rectly assembled
Dirt container (15) open
Dirt container (15) full
Filter (36/40) full or clogged Empty, clean or replace the
Filter (36/40) not assembled
or incorrectly assembled
In case of defects, you have statutory
rights against the seller of the product.
These statutory rights are not restricted by
our guarantee presented below.
Terms of Guarantee
The guarantee period begins on the date
of purchase. Please retain the original re-

Error correction

On/Off switch
Check the socket, mains con-
nection cable, plug and fuse
and have them repaired by a
qualified electrician if neces-
sary.
contact the service centre.
Removing obstructions and
blockages
Assemble the suction pipe
properly
Attaching and removing the
motor head, p. 32
Emptying the dirt container
filter
• Replacing a flat pleated
filter, p. 37
• Cleaning and replacing
the outlet filter, p. 37