Description Of Functions; Technical Data; Safety Information - Parkside Performance PPWD 30 A1 Originalbetriebsanleitung

21 Fleece filter bag
22 Sealing ring
23 Closing tab
24 Foil bag
25 Warning label
26 Floor nozzle
27 Holder (Power cord)
28 Holder (Suction tube)
29 Retaining lug
30 2 × Accessories holder (Motor
head)
31 Metal suction tube (two-part )
32 Air control
33 Handle
Fig. B
34 Connector
Fig. C
35 Lock (Suction hose)
Fig. D
36 Flat pleated filter
37 Holder (Flat pleated filter)
38 Lever
39 Safety screw
Fig. E
40 Outlet filter

Description of functions

The appliance is equipped with a dust-
tight dirt container. 2 swivel castors with
brake and 2 large, rubberised wheels
ensure high mobility and a stable stand.
When wet vacuuming, a sensor interrupts
the drive when the dirt container is full.
Please refer to the descriptions below for
information on how the operating ele-
ments work.

Technical data

Workshop Vacuum Cleaner
................................. PPWD 30 A1
Rated voltage U
........................... 220–240 V∼; 50/60 Hz
Rated output P ..............................1300 W
Power (Appliance socket) ..........≤2150 W
Length Power cord .............................7.5 m
Protection class ...........................................I
Protection type .....................................IPX4
Weight (including accessories) .....15.8 kg
Volume flow ..................137 m³/h (38 l/s)
Maximum negative pressure
........................................ 200 hPa (20 kPa)
Container volume
– gross ..................................................30 l
– net ......................................................18 l
– Liquid ................................................. 13 l
Sound pressure level (L
................................... 73 dB(A); K
Vibration (a ) ...........................≤2.50 m/s²
h
USB type C connection ................ 5 V; 2 A
frequency band ........ 2400–2483.5 MHz
transmitted power .......................≤ 20 dBm

Safety information

CAUTION! The fol-
lowing basic safety
precautions must be
observed while using
electrical devices to
protect against elec-
tric shock, injury and
risk of fire.
GB MT
)
pA
=3 dB
WA
27