Herunterladen Diese Seite drucken

Electrolux SB330NICN Benutzerinformation Seite 106

Vorschau ausblenden Andere Handbücher für SB330NICN:

Werbung

Verfügbare Sprachen

Verfügbare Sprachen

1. Clean the inside and accessories with
lukewarm water and some neutral
detergent.
2. Regularly check the door seals and wipe
them clean to ensure they are clean and
free from debris.
3. Rinse and dry thoroughly.
The lowest shelf, dividing the cooler
compartment from the rest of the cabinet, can
be removed only for cleaning. Pull out the
shelf straight to remove it. The cover plates
above the drawers in the compartment can
be taken out for cleaning.
8.4 Defrosting of the freezer
The freezer compartment is frost free. This
means that there is no build up of frost when
it is in operation, neither on the internal walls,
nor on the foods.
8.5 Defrosting of the fridge
Defrosting of the fridge compartment is
automatic. The water that condenses flows
into a recipient on the compressor and
evaporates. The recipient cannot be
removed.
8.6 Installing and replacing the
CleanAir+ filter
The CleanAir+ filter is an activated carbon
filter that absorbs bad odours and allows you
to preserve the best flavour and aroma for all
foodstuffs without risk of odour cross-
contamination.
Handle the air filter carefully to avoid
scratching its surface.
On delivery, the air filter is in a plastic
bag to preserve performance.
Install the air filter before activating the
appliance.
1. Unpack the air filter from the plastic bag.
2. Open the plastic housing and put the
pleated surface on the grid, fitting the
filter inside the marked area on the
gridded surface.
106
ENGLISH
3. Hold the filter down while closing the
plastic housing until you hear a click.
4. Remove the top glass shelf from the
fridge compartment. Slip the plastic
housing with the air filter on the left side
of the glass shelf.

Werbung

loading

Diese Anleitung auch für:

Sb330nims