Installation; Preparing For Use; Preparing The Machine For Use; Automatic Switch-Off - Tchibo CAFISSIMO Bedienungsanleitung

INSTALLATION

Preparing for use

Remove the coffee machine from the packaging and put it in a
suitable place.

Preparing the machine for use

1- Remove the water tank from its base.
2- Remove the lid from the water tank.
Rinse the water tank and fill it with
fresh, cold drinking water up to the
MAX level as indicated on the water
tank.
3- Place the lid back on the water tank.
4- Place the water tank on its base.
Hot water or any other liquid may damage the tank
and/or the machine. Do not operate the machine
without water. Make sure that there is always enough water
in the tank.
5- Insert the plug into an earthed walll socket with suitable power
voltage.
6- To turn the machine on, press the On/Off button
panel.
7- The service indicator light (orange) flashes because no water
has yet been pumped into the system. Follow the instructions
described in the next paragraph.
Using the machine for the first
time or after a long period of
inactivity
When using the machine for the first time
or if you have not used it for more than
2 weeks, follow the steps described below.
1- Rinse the tank and fill it with fresh
drinking water.
2- Ensure the lever is closed and place a
cup underneath the coffee dispensing
spout as shown in the picture.
3- Press the caffè crema button
a capsule.
4- When the cup is full, press the caffè crema button
the brewing process, then empty the cup.
The brewing process will stop once the preset volume
has been reached.
5- Repeat steps 2 to 4 until all the water in the tank has been
dispensed.
6- When all the water has been dispensed, the service indicator
light (orange) flashes to indicate that the water tank needs
filling. Refill the tank and repeat steps 2 to 5.
7- Refill the water tank; the machine is now ready to brew coffee.

Automatic switch-off

The machine automatically switches off after 9 minutes of inactivity.
To reactivate the machine, simply press the On/Off button
The machine can be turned off manually by pressing the
On/Off button

Adjusting the dispensing height

The machine can be used with a range of cup sizes.
The drip tray may be positioned on two levels to obtain different
dispensing positions.
Follow the instructions below to position the drip tray at the desired
level:
on the control
Fig. 1
1- Detach the drip tray from the machine by lifting slightly
outwards and upwards (Fig. 1).
2- Attach the drip tray by inserting the pins (on the
front of the drip tray) into the appropriate height
slots and pushing slightly inwards and downwards
(Fig. 2).
The drip tray may also be removed to create more space for large
cups or glasses (Fig. 3). In this case the cup or glass is placed directly
on the machine base underneath the drip tray.
(yellow) without inserting
.
Fig. 2
• 17 •
to stop
.
Fig. 3