Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Programming
1
Mode/Enter Set
Mode/Enter Set
2
3
Mode/Enter Set
Wait 5 s (the unit passes to the operating mode and
the current measured value is indicated again),
or start again with step 1 to program other parameters.
*Decrease the value: Let the display of the parameter value move to the
maximum setting value. Then the cycle starts again at the minimum setting
value.
Locking / unlocking:
The unit can be electronically locked to prevent unwanted adjustment
of the set parameters: Press both pushbuttons for 10 s. Indication goes
out (= acknowledgement of locking / unlocking).
Units are delivered from the factory in the unlocked state.
Press the Mode/Enter button
several times until the respective
parameter is displayed.
Press the Set button and keep
it pressed. The current parameter
value is indicated for 5 s,
then the value is increased*
(incremental by pressing briefly or
scrolling by holding pressed).
Press the Mode/Enter button
briefly (= acknowledgement).
The parameter is displayed again,
the set parameter value
becomes effective.
21
Werbung
