Installation
The unit is adaptable for various process fittings (adapters to be
ordered separately as accessories).
To ensure an optimum response
time align the unit as shown
(connector of the unit opposite
to the direction of the flow of
the medium).
1. Lubricate the nut (3) and all threads with grease to ensure the nut
can be loosened and tightened several times.
Note: No grease must be applied to the sensor tip (A).
2. Screw the suitable adapter (2) onto the process fitting (1).
3. Insert the temperature sensor into the adapter. While keeping the
unit aligned tighten the nut (3); (max. tightening torque 50 Nm).
1
2
A
thread M18 x 1.5
3
19