IFM Electronic efector 600 TN2530 Bedienungsanleitung Seite 17

Functions and features
The temperature sensor
• detects the current system temperature,
• shows the current system temperature on its display (in °C or °F),
• and generates 2 output signals according to the set output
configuration.
output 1
hysteresis function / N.O. (Hno)
hysteresis function / N.C. (Hnc)
window function / N.O. (Fno)
window function / N.C. (Fnc)
Measuring range
°C
°F
Operating modes
Run mode:
Normal operating mode
At power on the unit is in the Run mode. It carries out its measure-
ment and evaluation functions and provides output signals according
to the set parameters.
The value of the analog output depends on the temperature.
The LED display indicates the current temperature, the red LED indi-
cates the switching state of the transistor output.
output 2
analogue 4 ... 20 mA (I)
analogue 0 ... 10 V (U)
-40 ... +125
-40 ... 257
17