Herunterladen Diese Seite drucken

Chicago Pneumatic CP8603 Sicherheitshinweise Seite 8

Werbung

Safety Information
Technical Data
Product description
Refer to Schema 2.
1 Second trigger
2 Principle trigger
3 Display screen
4 Settings buttons
5 Reporting LEDs
6 Reverse button
7 Reaction bar s-type (delivered with the tool)
Declarations
EU Declaration of Conformity
We, CHICAGO PNEUMATIC Tool Co.LLC,
1815 Clubhouse Road, Rock Hill, SC 29730 -
USA, declare under our sole responsibility that
the product (with name, type, and serial number,
see the front page) is in conformity with the fol-
lowing Directive (s):
2006/42/EC; 2011/65/UE ; 2014/53/UE
Harmonized standards applied:
EN 62841-2-2:2014 + AC1:2015; EN
55014-1:2017+11:2020; EN 55014-2:2015; EN
61000-6-2:2019; EN 61000-6-3:2021 + A1:2011; EN
300328V222; EN 301489-17V324; EN 301489-1V223; EN
62311:2020; EN 62479:2010
Authorities can request relevant technical infor-
mation from:
Pascal Roussy, R&D Manager, Ets Georges Re-
nault, 38 rue Bobby Sands, BP10273 44818
Saint Herblain, France
Saint-Herblain, 2023/10/04
Pascal ROUSSY
UK Declaration of Conformity
We, CHICAGO PNEUMATIC Tool Co.LLC,
1815 Clubhouse Road, Rock Hill, SC 29730 -
USA, declare under our sole responsibility that
the product (with name, type and serial number,
see front page) is in conformity with the follow-
ing UK Regulation(s):
Supply of Machinery (Safety) Regulations 2008
The Restriction of the Use of Certain Hazardous Sub-
stances in Electrical and Electronic Equipment Regula-
tions 2012
Radio Equipment Regulations 2017
Designated Standards applied:
EN 62841-2-2:2014 + AC1:2015; EN
55014-1:2017+11:2020; EN 55014-2:2015; EN
61000-6-2:2019; EN 61000-6-3:2021 + A1:2011; EN
300328V222; EN 301489-17V324; EN 301489-1V223; EN
62311:2020; EN 62479:2010
8
Saint-Herblain, 2023/10/04
Pascal ROUSSY
Authorities can request relevant technical information from:
UK Authorized Representative:
Air Compressors & Tools Ltd
Unit 5 Westway 21
Chesford Grange, Woolston,
Warrington, WA1 4SZ
UK
Contact: M.Taylor
FCC compliance Class B
This device complies with Part 15 of the FCC Rules. Any
changes or modifications not expressly approved by the man-
ufacturer could void the user's authority to operate this de-
vice.
Operation is subject to the following two conditions:(1) this
device may not cause harmful interference, and (2) this device
must accept any interference received, including interference
that may cause undesired operation.
FCC Responsible party:
Name: Stuart Trott
Position: General Manager
Address: Chicago Pneumatic Tool Company
LLC 1815 Clubhouse Road Rock Hill
SC 29730
USA
Mobile: +1 800 624 4735
Email: Stuart.Trott@cp.com
Signature
IC compliance Class B
CAN ICES-3(B)/NMB-3(B)
© Chicago Pneumatic - 6159925520
CORDLESS NUTRUNNER
This equipment has been tested and found to comply
with the limits for a Class B digital device, pursuant to
part 15 of the FCC Rules. These limits are designed to
provide reasonable protection against harmful interfer-
ence in a residential installation. This equipment gener-
ates, uses and can radiate radio frequency energy and, if
not installed and used in accordance with the instruc-
tions, may cause harmful interference to radio communi-
cations. However, there is no guarantee that interference
will not occur in a particular installation. If this equip-
ment does cause harmful interference to radio or televi-
sion reception, which can be determined by turning the
equipment off and on, the user is encouraged to try to
correct the interference by one or more of the following
measures:
▪ Reorient or relocate the receiving antenna.
▪ Increase the separation between the equipment and re-
ceiver.
▪ Connect the equipment into an outlet on a circuit differ-
ent from that to which the receiver is connected.
▪ Consult the dealer or an experienced radio/TV techni-
cian for help.
Signature

Werbung

loading

Diese Anleitung auch für:

Cp8613Cp8626Cp8641Cp8681