Herunterladen Inhalt Inhalt Diese Seite drucken

Maintenance And Cleaning; Technical Data - VOLTCRAFT IR-110/IP67 Bedienungsanleitung

Ir-thermometer
Inhaltsverzeichnis

Werbung

Verfügbare Sprachen

Verfügbare Sprachen

c) Error messages
• The thermometer may display the following error messages:
Error code
Description
Err 2
The ambient temperature is
unusually high or low.
Err 3
The ambient temperature is not
within the thermometer's range.
Err 5
The device may have been
damaged by magnetic or
electromagnetic fields.
Err 6
Floating point error
Err 7
Electronic circuit is defective.
Err 9
Program error.

MAINTENANCE AND CLEANING

• Never use aggressive detergents, rubbing alcohol or other chemical solutions, as these
could damage the housing or even impair the functioning of the product.
• The device does not require maintenance apart from occasional cleaning and changing the
batteries.
• Use a soft, slightly damp and lint-free cloth to clean the device.
DISPOSAL
a) Product
Electronic devices are recyclable waste and must not be disposed of in the
household waste.
At the end of its service life, dispose of the product according to the relevant
statutory regulations.
Remove any inserted batteries and dispose of them separately from the product.
b) Batteries
As the end user, you are required by law (Battery Ordinance) to return all used batteries;
disposal of them in the household waste is prohibited!
Contaminated batteries are labelled with this symbol to indicate that disposal in the
domestic waste is forbidden. The designations for the heavy metals involved are:
Cd = Cadmium, Hg = Mercury, Pb = Lead (name on batteries, e.g. below the trash
icon on the left).
Used batteries can be returned to collection points in your municipality, our stores or
wherever batteries are sold.
You thus fulfil your statutory obligations and contribute to the protection of the environment.
Solution
Place the thermometer in a room
with a stable ambient temperature
for approx. 30 minutes before taking
another measurement.
The device must be repaired. It may
be irreparable.
Remove the batteries to reset the
device. Replace the batteries and
check whether you can take a
measurement. If the error message
still appears, the device is defective.

TECHNICAL DATA

Power supply ..........................................2 x 1.5 V LR44 button cell batteries
Measuring range (in °C / °F) ..................-33 to 110 °C / -27 to 230 °F
Resolution ............................................... 0.2 °C / 0.5°F at -9.9 to 110 °C,
Tolerance (temp. 23 ± 3 °C) ................... -33 to 0 °C: ±(2.5 +0.05/°C)°C,
Response time (90 %) ............................1 second
Protection rating .....................................IP67
Measuring distance ratio (D:S) ...............1 : 1
Emission level .........................................0.95 permanent
Automatic power-off ................................after approx. 15 seconds
Operating temperature ...........................0 to +50 °C
Storage temperature ...............................-20 to +65 °C
Operating/storage humidity ....................max. 85% RH, non-condensing
Dimensions (L x W x H) ..........................83 x 23 x 18 mm
Weight (with batteries) ............................approx. 25 g
EMISSION LEVEL OF DIFFERENT SURFACES
The emission levels listed in the table are approximate values. Different parameters such as
geometry and the surface quality can affect the emission level of an object.
Surface
Emission level
Aluminium, bare
0,04
Asphalt
0,90 - 0,98
Concrete
0,94
Ice
0,96 - 0,98
Ferric oxide
0,78 - 0,82
Hard plaster
0,80 - 0,90
Glass/Porcelain
0,92 - 0,94
Rubber, black
0,94
Wood
0,94
Legal notice
This is a publication by Conrad Electronic SE, Klaus-Conrad-Str. 1, D-92240 Hirschau (www.conrad.com).
All rights including translation reserved. Reproduction by any method, e.g. photocopy, microfilming, or the capture in electronic data processing
systems require the prior written approval by the editor. Reprinting, also in part, is prohibited. This publication represent the technical status at the
time of printing.
© Copyright 2016 by Conrad Electronic SE
1°C/1°F for other temperatures
> 0 °C: ±2.5% of the measured value or 2.5 °C
(4.5 °F), whichever is higher
Surface
Emission level
Varnish, matte
0,97
Foodstuffs
0,93 - 0,98
Human skin
0,98
Plastic
0,94
Paper
0,97
Sand
0,90
Textiles
0,90
Water
0,92 - 0.96
Bricks, plastering
0,93 - 0.96
V2_0516_02-HK

Werbung

Inhaltsverzeichnis
loading

Diese Anleitung auch für:

1380975

Inhaltsverzeichnis