AEG FAVORIT 55033W0 Benutzerinformation Seite 36

36 www.aeg.com
Problem
Activating the rinse aid
dispenser with the multitab
function activated
1. Press the on/off button to activate
the appliance. Make sure that the ap-
pliance is in setting mode. Refer to
'SETTING AND STARTING A PRO-
GRAMME'.
2. Press and hold function buttons (B)
and (C) at the same time until the in-
dicators above function buttons (A),
(B) and (C) start to flash.
3. Press function button (B) .
• The indicators above function but-
tons (A) and (C) go off.
10. INSTALLATION
WARNING!
Refer to "SAFETY INFORMA-
TION".
10.1 Installation under a kitchen counter
820 mm
Possible cause
The quality of the rinse aid
can be the cause.
The quality of the combi
detergent tablets can be
the cause.
570-600 mm
600 mm
Possible solution
Try a different brand of
rinse aid.
• Try a different brand of
combi detergent tablets.
• Activate the rinse aid dis-
penser and use the rinse
aid together with the
combi detergent tablets.
• The indicator above function but-
ton (B) continues to flash.
• The display shows the current set-
ting of the rinse aid dispenser.
4. Press function button (B) to change
the setting.
5. Deactivate the appliance to confirm
the setting.
6. Adjust the released quantity of rinse
aid.
7. Fill the rinse aid dispenser.
1. Make sure that the dimen-
sions of the recess agree with
the dimensions in the figure.
2. Put the appliance adjacent to
a water tap and a water drain.
Off
On