Werbung
Verfügbare Sprachen
Verfügbare Sprachen
3.
Technical data
Operating and environmental conditions:
• Non slippery surface
• Suitable ground conditions
• Ambient temperature + 5 °C to + 40 °C
Term
Mass solo, without drive unit (kg)
Length (mm)
Spindle outside diameter (mm)
Max torque impact wrench (Nm)
Sound pressure level (dB)
Sound power level (dB)
Tightening of bolts and nuts max size (m/s
Uncertainty K (m/s
Max. torque of the impact wrench SW24 (Nm)
Max. torque of the impact wrench SW10 (Nm)
Notice
The vibration emission level given in these instructions has been measured according to a measurement method
standardized in EN 62841 and can be used to compare one power tool with another. It is also suitable for a
preliminary assessment of vibration exposure.
The specified vibration level represents the main applications of the power tool. However, if the power tool is used
for different applications, with different attachments or poorly maintained, the vibration emission level may differ.
This can significantly increase the vibration exposure over the entire working period.
For an accurate assessment of the vibration exposure, the times when the device is switched off or is running but
not actually in use should also be taken into account. This can significantly reduce the vibration exposure over the
entire working period.
Establish additional safety measures to protect the operator from the effects of vibration, such as: maintenance of
power tools and accessories, keeping hands warm, organization of work processes.
)
2
– 17 –
• Humidity 30– 80 %
• Atmosphere non-corrosive
• Outdoor application
)
2
MiniFix
1.4
280
35
1630
95.2
106.2
18.9
1.5
1630
700
Werbung
