Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Function and features
The diagnostic electronics VSE001 is designed for the connection of
vibration sensors. It evaluates the sensor signals and indicates whether
a preset vibration value for the corresponding sensor has been
reached.
• Vibration diagnosis: up to 20 different rolling element bearings or
up to 80 selectable individual frequencies which can be divided
between 20 objects
• Adjustable diagnostic level
• Spectral analysis FFT, envelope-curve FFT, trend analysis
• Level monitoring to DIN 10816 (rms vibration velocity and peak
max.)
• Evaluation of
- up to 4 sensors VSAxxx or
- 1 ICP sensor (at the connection for sensor 1) and up to 3
VSAxxx sensors
• Maximum length of the sensor cable: 30 m
• 2 inputs for operating quantities (e.g. load and rotational speed):
- analogue 0/4...20 mA or
- digital pulses 24 V DC
• 2 outputs
- analogue (0/4...20 mA) or digital
- digital
• Settings with the PC software article no. VES003
• Communication via Ethernet with a PC or processor
The unit is not approved for safety-related tasks with respect to
the safety of operators.
Mounting
Mount the unit in a control cabinet of min. IP 54 to guarantee pro-
tection against accidental contact with dangerous contact voltages
and atmospheric influence. The control cabinet should be installed in
accordance with local and national regulations.
Mount the unit on a DIN rail. Mount it vertically and leave enough
14
Werbung
