Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Adjustments AME210, AME213
7.5 Setting the End Positions
After having completed the stroke
settings (see section 6), the end
positions "Valve open" and "Valve
closed" must be aligned with the
current and voltage values 0(4) -
20 mA, 0(2) - 10 V.
1. Switch on voltage supply.
➻ ➻ ➻ ➻
1
Green LED
2
Red LED
may flash or be de-
activated.
3
1
S2
2. Set switch
S2
ON
1
2 3 4 5
6 7 8
3. Briefly press push-button
➻ ➻ ➻ ➻
The actuator is opened and
closed several times; this
automatically aligns the end
positions.
40
must flash.
S2
2
:
Automatic
operation
3
.
During the alignment, the red
2
LED
is flashing, in the end it
will be deactivated.
The
adjustments
completed, the electrical ac-
tuator
is
operation.
4. Re-mount cover
Philips screws.
4
are
in
automatic
4
and tighten
Werbung
